BLOGGER TEMPLATES AND TWITTER BACKGROUNDS »

Thursday, April 21, 2016

Insulators vs. Conductors



Our journal sheet for this activity
Using a door hinge as a conductor
Today we explored insulators and conductors. The kids were given a baggy of 7 items - a binder clip, a dime, a penny, a Popsicle stick, an eraser, a pen, and a brad. They were also given the circuit supplies of a battery, wire, and a wire with a light bulb attached.

They were to test the items to determine if they were insulators or conductors. They did this by adding them to their circuits and observing whether or not they light came on. When they finished, they were to go around the room and find other things to test. Here are some pictures of the items they tested.
Using a metal letter as a conductor

Using a metal desk leg as a conductor

Figuring out the eraser is an insulator


Wednesday, April 20, 2016

Electrical Circuits


In science we've begun to explore electrical circuits, and what they must have in order to be complete. The kids were handed a battery, wire, and another wire with a light bulb attached, then they were told to make the bulb turn on. That's the most direction they were given.

All groups were eventually successful in turning on the light. It's always fun to hear their conversations as they make their cases for why their way will be successful. Most groups figured out they didn't even need the extra wire!
 After they finished, we discussed what parts an electrical circuit needs to be complete. It must have a power source, conductor, something that needs the power, then finally the circuit must be closed. We also discussed the idea that while circuits don't have to have an insulator on the wires, it's probably a great idea. ;) 


Circuit Journal Entry





Right Angles


As we begin to explore right angles, we first discuss the degrees involved. From our prior knowledge regarding quadrilaterals, we know they are made up of 360 degrees. We further the discussion by looking at a quadrilateral that is made up of four right angles. If there are four, and they're all equal, they must measure 90 degrees.

After this discussion, we decide how we might find right angles within a shape. This leads us to using the edge of an index card. I find this helps those kiddos who struggle a bit more with spatial concepts.

After lots of playing around with shapes and labeling their angles, we move on to combining polygons to make right angles. This is a bit more challenging. This always leads to great discussion about what size angles might we pick when trying to make a right angles. The kids can see they need to be looking for angles smaller than 90 degrees, otherwise their angles are going to be too large. As the kids found angle combinations that worked, they recorded them in their journals.







Tuesday, April 19, 2016

Separating Mixtures and Solutions...Again

Today we separated mixtures of sand and water, sugar and water, and salt and water. We first mixed the materials, then predicted what would happen when we evaporated the water. As a class, we decided the sugar and water would all evaporate because the sugar had dissolved into the water. We hypothesized the sand would remain from the sand and water mixture, and the salt would remain from the salt and water mixture. After the water had all evaporated, we examined what was left. The students were pretty surprised by the results from the sugar. The sugar had not evaporated. In fact, the sugar and water had created a thick syrup. Sugar crystals actually started to form on the sides and top of the beaker after the syrup sat for a while.



Monday, April 18, 2016

Separating Mixtures and Solutions - Beach in a Bucket

This week we worked on ways to separate mixtures and solutions. One of the labs we did was a beach in a bucket. The kids first made their beaches by combining in a bucket 1 cup of sand, 2 tablespoons of salt, 1 cup of gravel, 4 larger rocks, and 1 cup of water. After we mixed all the ingredients together, we discussed what part of our beach was the mixture (sand, rocks, gravel) and what part was the solution (salt and water.)  We began separating the rocks with a spoon, then we used a sieve to separate the gravel. This left our sand, water, and salt. Many of the kids initially thought sand would be part of the solution because the sand would dissolve in the water. We proved this was not the case by letting the sand, salt, and water sit overnight. When we returned the next morning, the sand had settled to the bottom of our beaker.

Separating rocks from our beach

Separating gravel



























What is left after taking out gravel



















We used a colander lined with a paper towel to separate our sand from our water and salt.
Separating sand
















Finally, we were left with our solution, which we knew was going to be much more difficult to separate. After some discussion, the kids decided we needed to use a hot plate to evaporate the water. Some kids thought the salt would be left behind, but some were sure it would also evaporate because it had dissolved in the water. We used our hot plate to boil the water for a while, and when we returned, we found a cup full of dry salt!



The salt left in the beaker

Separating water and salt

Separating Mixtures and Solutions


This week we created some mixtures and examined ways to separate them. We began with a food coloring and water mixture and also a sugar and water mixture. With both of these mixtures, one of the materials completely dissolved, thereby giving us a solution (special kind of mixture where one thing dissolves into another).

Next we mixed sand and water. No matter how much we tried, we couldn't get the sand to dissolve in the water. We determined this was a mixture because the sand didn't dissolve. When trying to separate the two materials, we first let the sand settle to the bottom, then we used a coffee filter to filter the sand from the water.

Our next mixture was sand and gravel. When mixed, the two materials retained their physical properties. We simply had to use a sieve to separate the two materials.

Finally, we combined iron filings and pepper. The students used a magnet to separate these two materials. This was the students' favorite mixture to separate! The way the iron filings stuck to the magnet was pretty cool!






Monday, April 11, 2016

Perimeter

Today we began perimeter. The children learned perimeter last year, so we just briefly discussed what it is. "Peri" means around, and "meter" means measure. Therefore, perimeter is simply measuring around an object. After we practiced finding the perimeter of several rectangles and squares, I asked the kids to make me a shape using color tiles with a perimeter of 10. Out of all 40 math students I had yesterday, only one did it correctly. Almost every child used 10 tiles to make a rectangle, as pictured. I let them finish, then we discussed why this wasn't correct. "You all told me the perimeter means the distance around the outside. Then you  made me a shape where the distance around was 14. Why does using 10 tiles give you a perimeter other than 10?"  Eventually the kids were able to explain the tiles would all have to have only one side facing out to give them a perimeter of 10, which isn't possible. Then I challenged the kids to go back and fix their shapes. All were able to do it correctly. We also looked at three different shapes (also pictured) that used a different number of tiles, but had a perimeter of 10. Again, we focused on the sides facing out and discussed how this was possible.

After this, we made shapes with a perimeter of 12, then 20. All were able to do this correctly, and many got very creative with their shapes!

Incorrect Perimeter of 10
How do these all have a perimeter of 10?


















Area vs. Perimeter Anchor Chart

Symmetry

4th graders usually have a pretty good grasp on symmetry in shapes, though we do begin with a quick review.

Symmetry Journal Entry
We talk about what symmetry is, and also explore several shapes to find their lines of symmetry.

















We move to finding lines of symmetry within letters. The kids are given a stack of capital letters, and must determine if they have a horizontal line of symmetry, vertical line of symmetry, both horizontal and vertical lines of symmetry, or no line of symmetry. We discuss the way our letters are made, and how if the letter were made differently the line of symmetry could change. For example, the way our B is printed, there is no line of symmetry. If the B had equal "humps" on the top and bottom, there would be a horizontal line of symmetry.
Symmetry of Letters






























After this discussion, I challenge the kids to make words using only vertical lines of symmetry, as well as words using only horizontal lines of symmetry. This is quite the challenge! I do allow them to use the letters with no lines of symmetry in their words. Otherwise, horizontal is a tad difficult. ;)